IoT-targeted MCUs look mostly at network connectivity in the form of wired (Ethernet) or wireless (Wi-Fi, Bluetooth or others), lower power and a wide range of sensors like temperature, motion or humidity.
Addition of communication standards like Wi-Fi and Bluetooth Low Energy (BLE). An upcoming chip from Espressif Systems has both Wi-Fi and BLE put together in one system on chip (SoC), ESP32, which could be another game-changer.
The most exciting feature for him in the last 18 months has been the introduction of universal serial bus (USB) Type-C interface in MCUs from Cypress, Texas Instruments, NXP and others. “While USB Type-C has just entered the market in late 2015, it is going to rapidly reach more than a billion consumers within the next 18 months—starting with smartphones, personal computers and tablets.
Baikal-T1 processor is the first Russian offering for the communications market to use a MIPS P-class Warrior CPU, boasting highly-competitive properties in terms of performance, technology node and compatibility.
The upper boundary level of MCU has been constantly pushed up in the past few years, thanks to higher speed and processing power likewise, with the latest introduction of ARM cortex M7 (STM32F7) and STM32 enhanced architecture element such as ART accelerator, there is still a quantic barrier made up by the operating system (OS), which cannot be run out of MCU platform. Only a microprocessor unit (MPU) with a memory management unit (MMU) can operate iOS or Android OSes.”
That more functionalities previously handled by MPUs are managed by the MCU. For instance, the sensor-hub function that was implemented by the main AP is now covered by a dedicated MCU with outstanding power-consumption benefit for battery-operated devices such as smartphones.
Reducing manufacturing costs
The last 18 months are mostly incremental and evolutionary such as continued lower power and better integration with more features like camera interfaces.
Newer MCUs come with integrated functionality that was previously handled by external components. This allows design engineers to reduce their bill of materials. Availability of multi-standard support for communication standards, sensor fusion or hardware based security are all small but definite steps towards a more integrated, smaller and less expensive end system.
While cost savings are very minute on an individual level, these greatly add up with volume. Moreover, these simplify or solve many other problems faced while placing numerous components onto a circuit board that has to shrink with each successive generation to keep up with customer requirements.
If everything is integrated together in a module, overall size and cost of the IoT solution will also be extremely less, thereby making products competitive. Engineers today are looking for MCU-integrated modules, where they can write their own applications. Signals has solutions coming up where an MCU will be integrated inside modules for vehicular communication.
The features we would like to see in more MCUs are in the area of vision capabilities. Adding computer vision to IoT MCUs will dramatically increase their applicability in broad areas including security/surveillance, drones, robotics and so on.
Key features needed in MCUs to support computer vision are integrated image or camera sensors with newer technologies like RGB-IR sensors for better low-light sensitivity and faster processors like ARM Cortex-A series processors to handle more computationally-intensive vision processing.
Newcomers like STM32F4x9 with HW graphic acceleration (Chrom-ART accelerator) and MIPI support are good for applications with displays. Embedded hardware with PDM-to-PCM conversion (DFSDM on STM32L4), together with low-power batch-acquisition mode, allows voice-recognition feature to run efficiently on STM32 platform.
With significant integration and lower cost requirements, MCUs have been going down process nodes more aggressively than in the past.
Wireless connectivity and MCUs are now showing up either in a single package or on monolithic silicon as MCUs and connectivity are going hand in hand. Finally, power management features such as buck converters are getting integrated into MCUs to allow better power efficiency.
As mentioned above, the fact that dynamic power and area reduce at advanced geometries and aggressive integration requirements, lower process node such as 55nm and below are becoming common place. “Requirement of integrated flash puts a brake on going down all the way to the most aggressive process geometries used by microprocessors. Aggressive power shut off, multi-voltage and low-voltage designs are some of the architectural changes seen in reducing power consumption.
As we already know, the line between MCUs and SoCs is getting blurred. Looking at the advances that have happened, blurred seems to be an understatement. Cores are now available from firms like Imagination Technologies, which allow MCU or embedded controller developers to build MCUs that can go so far as to execute full-blown OSes like Linux.
When can you start using such chips in your project? For starters, Microchip has already announced on their website that the CPU at the heart of their PIC32MZ family has been upgraded to a MIPS M5150—a Warrior M-class processor core that comes with full hardware visualization.
No comments:
Post a Comment